UFES OP
Thermal Oil Pumps
- Single stage, end suction centrifugal pumps.
• Main pump dimensions are compatible with DIN 24256 (ISO
2858).
• Single entry, closed type impeller is used.
• Radial vanes are used behind the impellers to lower the
pressure and to balance the thrust (axial force).
• The pump and the motor are connected by means of a flexible
coupling on a common base plate.
• Maintenance of the pump is very easy. The shaft and other
rotating parts can be removed without dismantling the suction
and the discharge system.
• Since the pump uses many standard parts, spare parts are
readily available.
• These pumps are designed so that there is no need for
external cooling. Due to natural convection the pump
temperature decreases towards the roller bearing
TECHNICIAL SPECIFICATIONS
Suction Flange | DN 50…DN 125 |
Discharge Flange | DN 32…DN 100 |
Operating Pressure | 16 Bar |
Speed | 1500 – 3000 rpm |
Flow Range | 10 – 400 m3 / h |
Head Range | 5 – 90 m |
SCOPE OF APPLICATION
FIELDS OF APPLICATIONS
Transfer of heat transfer fluid.
• Chemical installations and refineries.
• Paper and sugar industry.
• Food and pharmaceutical industries.
• Leather industry.
• Plastic and synthetic fiber industries.
• Rubber industry.
• Vulcanizing and heating industry.
• Textile industry