UFVMS-M
DESIGN
- The UFVMS-M Pump is a vertical axis, radially split, ring section design multistage centrifugal pump of non-self priming type.
- Impellers are between bearings, single entry, closed type and dynamically balanced. Impeller diameter will be corrected for optimal adherence to the required duty point.
- For balancing the axial thrust, all impellers have back wear rings. For high pressure, balance disc application is used.
- The pump series consists of 2 sizes. UFVMS 100 and 125. Stages are from 2 up to max. 7 stages.
- Pump and motor are connected to each other via flexible coupling.
- Normally, discharge part is at motor side and suction part is at dead end side.
Suction and discharge nozzles may be a choice of three 90° positions. By special request, it is possible to put the suction nozzle at the motor side. In this arrangement pump and motor rotation must be counter clockwise
TECHNICAL SPECIFICATIONS
Suction Flange | DN 125…DN 150 (PN 16) |
Discharge Flange | DN 100…DN 125 (PN 40) |
Operating Pressure | 40 Bar (Max) |
Speed | 1450 -1750 rpm |
Stage Number | 2 – 7 |
Flow Range | 30 – 300 m³ / h |
Head Range | 30 – 190 m |
SCOPE OF APPLICATION
Fields of Application
For pumping of clear and slightly contaminated liquids in:
- Water supply systems,
- Booster sets in high rise buildings and industry,
- Water treatment,
- Industrial washdown systems,
- Fire extinguishing plants,
- Boiler feed and condensate transfer,
- Sanitary and cleaning installations,
- For industrial applications and public services,
- Water distribution services,
- Industrial applications,
- Shipbuilding, Mining, Power Stations, Filter Units,
- Irrigation plants,
Central heating systems