UFES CC
End Suction Monoblock Centrifugal Pumps
- UFES CC Series are volute, single stage, end suction mono-block type centrifugal pumps. It is produced with closed impellers and mechanical seals as standard.
- Main dimensions and nominal flow rates are in accordance with the values recommended in DIN 24255 and EN 733.
- Flanges are in PN 16 pressure class in accordance with ISO 7005-2, DIN 2533 standards.
- Through the axial force wear ring and balancing holes acting on the impeller.
- The motor and the pump are two separate units, so, there are two separate shafts. The motor shaft is manufactured as a fitting to the pump shaft. However, for motors above a certain power, the pump and motor shaft are connected by a separate coupling.
TECHNICAL SPECIFICATIONS
Suction Flange | DN 50… DN 150 |
Discharge Flange | DN 32…DN 125 |
Operating Pressure | 10 Bar |
Casing Test Pressure | 13 Bar |
Working Temperature | -25 – 120°C |
Impeller Dia. | 123…428 mm ø |
Speed Range | 1450 – 2900 rpm |
Flow Range | 5 – 400 m³ / h |
Head Range | 4 – 110 m |
SCOPE OF APPLICATION
End Suction Monoblock Centrifugal Pumps
- Transfer of corrosive, explosive, burnable, toxic, valuable,
volatile and hot liquids.
• Chemical and petrochemical industries
• Detergents known as dangerous fluid in food facilities
• Harmful gas cleaning systems
• Biodiesel facilities
• Heating and cooling systems
• Power stations
• Solar energy systems
• Medical industries
• Electrostatic applications of powdered paint
• Cooling systems of carbon arc furnace