UFES CC

End Suction Monoblock Centrifugal Pumps

Design

  • UFES CC Series are volute, single stage, end suction mono-block type centrifugal pumps. It is produced with closed impellers and mechanical seals as standard
  • Main dimensions and nominal flow rates are in accordance with the values recommended in DIN 24255 and EN 733.
  • Flanges are in PN 16 pressure class in accordance with ISO 7005-2, DIN 2533 standards.
  • Through the axial force wear ring and balancing holes acting on the impeller.
  • The motor and the pump are two separate units, so, there are two separate shafts. The motor shaft is manufactured as a fitting to the pump shaft. However, for motors above a certain power, the pump and motor shaft are connected by a separate coupling.

Technical Specification

Suction FlangeDN 50... DN 150
Discharge FlangeDN 32...DN 125
Operating Pressure10 Bar
Casing Test Pressure13 Bar
Working Temperature-25 – 120°C
Impeller Dia.123...428 mm ø
Speed Range1450 – 2900 rpm
Flow Range5 – 400 m³ / h
Head Range4 – 110 m

Scope of applications

  • Transfer of corrosive, explosive, burnable, toxic, valuable, volatile and hot liquids.
  • Chemical and petrochemical industries
  • Detergents known as dangerous fluid in food facilities
  • Harmful gas cleaning systems
  • Biodiesel facilities
  • Heating and cooling systems
  • Power stations
  • Solar energy systems
  • Medical industries
  • Electrostatic applications of powdered paint
  • Cooling systems of carbon arc furnace